Motor ER Collet Punch Former
► Motorised function prevent human fatigue when processing.
► With ER collets, the flexible range of collet is 1mm.
► Clamping under 4mm apply ER16 collet.
► PFDM can rapidly clamp the workpiece and achieving higher stability during processing, no need to adjust the center accuracy.
► This model is compatible with various ER collets such as ER16, ER32, ER40 etc...
Main parameters:
Center height…………………80 ~ 81mm
Motor : 110V/60Hz ……50 ~ 300 RPM
Motor : 220V/50Hz…….50 ~ 300 RPM
Note:
Variable speed from 1 to 100 ratio, when 100 is
set the top speed is 300rpm, when set on 100 rpm,
the panel is set approx. 30 ratio.
► With ER collets, the flexible range of collet is 1mm.
► Clamping under 4mm apply ER16 collet.
► PFDM can rapidly clamp the workpiece and achieving higher stability during processing, no need to adjust the center accuracy.
► This model is compatible with various ER collets such as ER16, ER32, ER40 etc...
Main parameters:
Center height…………………80 ~ 81mm
Motor : 110V/60Hz ……50 ~ 300 RPM
Motor : 220V/50Hz…….50 ~ 300 RPM
Note:
Variable speed from 1 to 100 ratio, when 100 is
set the top speed is 300rpm, when set on 100 rpm,
the panel is set approx. 30 ratio.
