Motor 3-Jaw Punch Former
► Motorised function prevent human fatigue when processing.
► Increase efficiency when processing punches.
Main parameters:
Center height………………………………………80 ~ 81mm
Rotational accuracy…………………………………0.003mm
Repeat accuracy………………………………………0.015mm
Hole dia. of 3-Jaw Chuck…………………………Ø 16mm
Min. clamping range O.D. Ø 2mm, I.D. Ø 24mm
Max. clamping range O.D. Ø 70mm, I.D. Ø 64mm
Motor : 110V/60Hz………………………………50~300rpm
Motor : 220V/50Hz………………………………50~300rpm
Note:
Variable speed from 1 to 100 ratio, when 100 is
set the top speed is 300rpm, when set on 100 rpm,
the panel is set approx. 30 ratio.
► Increase efficiency when processing punches.
Main parameters:
Center height………………………………………80 ~ 81mm
Rotational accuracy…………………………………0.003mm
Repeat accuracy………………………………………0.015mm
Hole dia. of 3-Jaw Chuck…………………………Ø 16mm
Min. clamping range O.D. Ø 2mm, I.D. Ø 24mm
Max. clamping range O.D. Ø 70mm, I.D. Ø 64mm
Motor : 110V/60Hz………………………………50~300rpm
Motor : 220V/50Hz………………………………50~300rpm
Note:
Variable speed from 1 to 100 ratio, when 100 is
set the top speed is 300rpm, when set on 100 rpm,
the panel is set approx. 30 ratio.
